Home / Products / Special Mortar Masterbatch / Anti-Crack Mortar Masterbatch

Anti-Crack Mortar Masterbatch ZX-02 · JG/T 158-2013

Composite powder additive masterbatch for anti-crack rendering mortar — replaces cellulose ethers, simplifies formulas and reduces cracking.

Anti-Crack Mortar Masterbatch (ZX-02)

Anti-Crack Mortar Masterbatch (ZX-02)

JG/T 158-2013 External Thermal Insulation System Materials

A composite powder additive masterbatch developed for anti-crack rendering mortar, fully replacing HPMC/HEMC cellulose ethers and combining inorganic water-retention, shrinkage-reducing, flexible-reinforcing and thixotropic stabilizing components. One masterbatch delivers water retention, thickening, smoothness and shrinkage reduction, suited to EPS/XPS/rock-wool insulation rendering mortar and other thin-layer anti-crack mortars.

Replaces cellulose ethersWater retentionAnti-sagShrinkage & crackBroad compatibility
KEY FEATURES

Key Advantages

01

Replaces cellulose ethers

No more HPMC or starch ethers in the formula — simpler materials, less purchasing and warehousing.

02

Stable water retention & open time

Controlled water loss in hot, windy conditions with a stable working window and fewer joint cracks.

03

Good anti-sag & thixotropy

No sagging at 2–3 mm thin coats; smooth trowelling and stable feel.

04

Shrinkage & crack reduction

Built-in shrinkage-reducing components ease fast water loss, cracking and high cost.

05

Broad adaptability

Works with ordinary Portland cement, fly ash, calcium carbonate and quartz sand; tolerant of manufactured and river sand.

06

No strength loss

Unlike cellulose ethers, does not reduce compressive/flexural strength; non-toxic and non-corrosive.

Technical Parameters

AppearanceLight yellow dry powder
Bulk density0.50–0.70 kg/L
Moisture≤5%
Fineness≤5% retained on 60-mesh
pH (1% solution)6–9
Dosage2.0–4.0 kg/ton (of dry mortar)
StandardJG/T 158-2013, JGJ/T 220-2010
Packaging20 kg/bag, moisture-proof lined woven bag

Applications

  • External insulation rendering anti-crack mortar (EPS, graphite, rock-wool and XPS boards)
  • Interior flexible anti-crack plastering and leveling mortar
  • Thin-bed masonry/plastering mortar for aerated blocks and ALC panel bonding mortar
  • Substrate repair and anti-crack leveling dry mortar
APPLICATION

How to Use

General steps — refer to the technical briefing for specifics

1

Trial

Remove cellulose ethers and starch ethers, add this product directly; run a small trial first.

2

Dry dosing

Add with cement, sand, calcium carbonate and polymer powder; mix 5–8 min until uniform.

3

Water mixing

Add water at 0.22–0.26 w/c ratio, mix 2–3 min, rest 3–5 min, then re-mix.

4

Application params

Ambient 5–35°C; single coat 2–3 mm with alkali-resistant mesh embedded.

5

Curing

Keep moist in hot, dry conditions to reduce cracking from water loss.

RELATED

Related Products

Click a product to view its detail page