Home / Products / Engineered Specialty Mortars / Polymer Cement Waterproof Mortar

Polymer Cement Waterproof Mortar JC/T 984-2011

A rigid waterproof mortar combining cement and polymer — impermeable, firmly bonded, water-resistant, workable on damp substrates.

Polymer Cement Waterproof Mortar packaging

Polymer Cement Waterproof Mortar

Standard: JC/T 984-2011

A rigid waterproof mortar combining cement with polymer emulsion (or redispersible powder). It offers high impermeability pressure, firm bond, water resistance, crack resistance, workability on damp substrates and low environmental impact, and is widely used in bathrooms, basements, pools and tunnels where waterproofing is required.

High impermeabilityFirm bondWater-resistantWorks on damp substratesEco-friendly
KEY FEATURES

Product Features

01

High impermeability

Excellent impermeability resists water pressure and seepage for a reliable waterproof layer.

02

Firm bond

Strong adhesion to the substrate prevents hollowing and delamination.

03

Water-resistant

Resists water and aging, staying stable under soaking and wet-dry cycling.

04

Damp-substrate workable

Can be applied directly to damp substrates without full drying — faster schedule.

05

Crack resistance

Polymer modification adds flexibility to follow minor substrate movement.

06

Eco-friendly

Water-based and non-toxic, suitable for interior waterproofing.

Technical Parameters

FormSingle-component dry powder (add water and mix)
StandardJC/T 984-2011
ApplicationBathroom / kitchen / pool / basement / tunnel waterproofing
PackingBagged, subject to factory packaging
QCEvery batch tested; test reports and certificates shipped with goods

Applications

  • Interior waterproofing of bathrooms, kitchens and balconies
  • Waterproofing of basements, pools and water-retaining structures
  • Tunnel and utility tunnel lining waterproofing
  • Anti-seepage of exterior walls and roofs
APPLICATION

Construction Steps

General application steps; refer to the technical brief for specifics

1

Surface prep

Clean dust and oil, repair holes and cracks, round internal corners.

2

Wetting

Wet the substrate thoroughly before application, with no standing water.

3

Bonding coat

Apply bonding agent as needed to improve adhesion.

4

Trowel

Apply the mortar in layers, controlling thickness and compacting well.

5

Curing

Moist-cure promptly to prevent early cracking and ensure waterproofing.

MA
CNAS
Batch-Tested · Traceable Quality

All products are produced to national / industry standards and tested by third-party laboratories. Reports carry MA / CNAS marks and the official inspection seal, and accompany every shipped batch with the certificate of conformity.

RELATED

Related Products

Click a product to view its detail page