Home / Products / Engineered Specialty Mortars / High-Performance Composite Mortar

High-Performance Composite Mortar GB 50728-2011

A strengthening and repair mortar with high-performance admixtures and mineral additions — high strength, low shrinkage, strong bond.

High-Performance Composite Mortar packaging

High-Performance Composite Mortar

Standard: GB 50728-2011

A cement-based strengthening and repair mortar blended with high-performance admixtures and mineral additions. It offers high strength, strong bond, low shrinkage, impermeability and corrosion resistance, and good compatibility with concrete, and is widely used in concrete structural strengthening and repair, section enlargement and masonry reinforcement.

High strengthStrong bondLow shrinkageImpermeable & corrosion-resistantConcrete-compatible
KEY FEATURES

Product Features

01

High strength

High compressive strength to meet the mechanical demands of structural strengthening.

02

Strong bond

Bonds firmly with existing concrete so old and new work together.

03

Low shrinkage

Low shrinkage reduces the risk of repair-layer cracking and debonding.

04

Impermeable & resistant

Impermeable and corrosion-resistant, stable under harsh long-term exposure.

05

Good compatibility

Thermal and elastic behavior matches concrete for coordinated deformation.

06

Pumpable or trowelable

Cast or troweled to suit different strengthening and repair methods.

Technical Parameters

FormSingle-component dry powder (add water and mix)
StandardGB 50728-2011
ApplicationConcrete strengthening & repair, section enlargement, masonry reinforcement
PackingBagged, subject to factory packaging
QCEvery batch tested; test reports and certificates shipped with goods

Applications

  • Strengthening and repair of concrete beams, columns and slabs
  • Section enlargement and filling after rebar planting
  • Crack repair and surface protection
  • Masonry reinforcement and surface strengthening
APPLICATION

Construction Steps

General application steps; refer to the technical brief for specifics

1

Surface prep

Remove loose concrete, clean dust and oil, repair defects and wet the surface.

2

Rebar & mesh

Plant rebars and fix steel mesh as designed, securely in place.

3

Formwork

Set up formwork where casting is required, keeping joints tight.

4

Placement

Cast or trowel to the designed thickness with proper compaction.

5

Curing

Cover and moist-cure promptly to ensure normal strength gain.

MA
CNAS
Batch-Tested · Traceable Quality

All products are produced to national / industry standards and tested by third-party laboratories. Reports carry MA / CNAS marks and the official inspection seal, and accompany every shipped batch with the certificate of conformity.

RELATED

Related Products

Click a product to view its detail page