Home / Products / Engineered Specialty Mortars / Powder Accelerator (ZX-N)

Powder Accelerator (ZX-N) GB/T 35159-2017

A powdered admixture for rapid setting of shotcrete — fast set, high early strength, low rebound, minimal late-age strength loss.

Powder Accelerator (ZX-N) packaging

Powder Accelerator (ZX-N)

Standard: GB/T 35159-2017

A powdered admixture that makes shotcrete set rapidly. It features short initial and final setting times, fast early strength gain, low rebound and minimal effect on late-age strength, with good cement compatibility — widely used in tunnel and mine shotcrete, rapid repair and construction, and leak-stopping works.

Fast settingEarly strengthLow reboundMinimal late-age lossGood cement compatibility
KEY FEATURES

Product Features

01

Rapid setting

Short initial and final set times let shotcrete build up quickly, reducing fallout and rebound.

02

High early strength

Fast early strength gain quickly provides load capacity for safe working.

03

Low rebound

Effectively lowers spray rebound, saving material and improving productivity.

04

Minimal late-age loss

Little effect on late-age strength, preserving long-term quality.

05

Good compatibility

Compatible with various cements, with stable dosage and controllable performance.

06

Easy to disperse

Powder form is easy to dose and disperse, suiting both dry- and wet-mix processes.

Technical Parameters

FormPowder admixture (dosed by cement weight)
StandardGB/T 35159-2017
ApplicationTunnel / mine shotcrete, rapid repair, leak stopping
PackingBagged, subject to factory packaging
QCEvery batch tested; test reports and certificates shipped with goods

Applications

  • Shotcrete works in tunnels, mines and foundation pits
  • Shotcrete anchorage and primary support
  • Rapid repair and construction, fast leak stopping
  • Spraying for underground works and slope protection
APPLICATION

Construction Steps

General application steps; refer to the technical brief for specifics

1

Trial mix

Run a trial to determine the optimum dosage for the cement type and temperature.

2

Dosing

Dose accurately by cement weight, keeping the dosage stable.

3

Mixing

Mix thoroughly with cement and aggregate to ensure even dispersion.

4

Spraying

Spray by dry- or wet-mix process, controlling the spray parameters.

5

Curing

Cure promptly after spraying to ensure normal strength gain.

MA
CNAS
Batch-Tested · Traceable Quality

All products are produced to national / industry standards and tested by third-party laboratories. Reports carry MA / CNAS marks and the official inspection seal, and accompany every shipped batch with the certificate of conformity.

RELATED

Related Products

Click a product to view its detail page